911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-895004.png)
-
After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.
Removing head airbag unit
WARNING: Removing and installing airbag unit.
-
Danger of injury and material damage if airbag units are not handled correctly.
-
Always observe the safety regulations for handling airbag units.
-
Disposal regulations for airbag units must be observed.
-
If removed for an extended period, the airbag unit must be stored in a safe place.
-
Remove ignition key. Disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier (e.g. body, seat frame) is
avoided.
-
After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.
1. With a screwdriver, carefully release the locking element of the plug connection for the airbag unit and remove the plug from the airbag module.
2. Unscrew the three fastening nuts -1- and remove the ground lead -2-.
