911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
-
Tear off the tear-off label -2- on the new component -1- and stick it under the heading Proof of airbag system check/component replacement in the
Guarantee and Maintenance booklet.
-
The replacement date and mileage must be documented and the booklet must be stamped with the dealer's stamp.
1. Position triggering unit, move both ground straps -2- on the left fastening bolts and screw down with the three fastening nuts -1-. Tightening
torque: 8 Nm (6 ftlb.)
2. Connect electric plug and lock it until the lock engages.
3. If the triggering unit is new, lock the airbag triggering unit using the PIWIS Tester 9718.
Subsequent work