911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-119002.png)
-
Remove ignition key. Disconnect battery. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.
-
Always wait one minute after disconnecting the battery before disconnecting the connector from the sensor.
-
The airbag sensor must not be removed with the plug plugged in.
-
The airbag sensors cannot be interchanged. Install the sensor listed in the Spare Parts Catalogue (PET).
-
Always replace fastening nuts and bolts of sensors after customer service and reworking.
-
Never make alterations to the micro-encapsulated nuts and bolts which have a negative effect on the bond (e.g. using lubricant, loosening bolts and
screwing them down again).
Tools and materials
Tools
Removal tool, universal NR.21
Removing airbag sensor
1. Unlock electrical connector -1- -A- and remove from sensor.
2. Unscrew the two fastening nuts -2- and remove the sensor.
