911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Disconnecting Electrical Connections
4. Release and unplug the electrical connector -A-.
5. Unscrew fastening nut -B- for the B+ lead -4- and remove the B+ lead.
Installing three-phase generator
Installation Position
Connecting Electrical Connections
1. Place the three-phase generator on the engine and fit the B+ lead -4-, tightening with the fastening nut -B-. Tightening torque 11 ftlb..
2. Press in the electric plug until it clicks into place.
Positioning Three-phase Generator On The Engine
3. Insert the three-phase generator into the engine area -C-, then push upwards -B- and lift over the bracket -A-.
Screwing Down Vacuum Modulator
4. Position vacuum modulator over the three-phase generator and screw it down with the fastening screws -3-. Tightening torque 6.5 ftlb..