911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Alternator: Removal and Replacement
Removing And Installing Three-Phase Generator
Preliminary work
Preliminary work - three-phase generator
Disconnect battery.
Removing three-phase generator
1. Unscrew the two fastening screws -1, 2- and remove together with the deflection roller.
2. Unscrew the two fastening screws -3- for the vacuum modulator.
3. Lift the right generator over the bracket on the engine -A-, then pull forwards and down -B- and raise clear of the engine from the rear -C-.