911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
3. Fasten seat belt mount at left and right.
3.1. Tighten fastening screw -2-, seat belt with fitting -3- and spacer sleeve -4- on inner lower side member. - Tightening torque: 50 Nm (37 ftlb.)
3.2. Press in -1- cap.
Installing front main wire harness
1. Push through main wire harness in direction of plenum panel.
2. Fit grommets -41- centre, left and right.