911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Removing And Installing Wire Harness For Convertible Top
Technical values
Preliminary work
Preliminary work for convertible top wiring harness
1. Remove convertible-top covering.
Preliminary work for wiring harness for roll-over protection system
1. Disconnect battery.
2. Remove roll-over bar.
Removing wire harness for convertible top
Removing plastic panel
1. Remove plastic panel.
1.1. Unscrew fastening screws -4- and remove plastic bracket -2- from roof frame 1 -3-.
1.2. Turn fixing clip -1- 90 degrees counterclockwise and remove to the rear from the plate of the plastic panel -2-.
Disconnecting wire harness plug connection for convertible top