911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
17.1. Remove tie-wrap -Arrow-.
17.2. Release engine wire harness at the two plug connections and disconnect it by turning the bayonet locks anti-clockwise.
18. Unclip cable duct on the left and right.
18.1. Unclip cable duct on the left and right at the fuel distributor pipes -Arrows-.
19. Unclip starter lead.
19.1. Unclip starter lead at cable duct -Arrows-.
20. Remove cable duct.
20.1. Unscrew fastening screws, unclip cable duct -Arrow- and remove it.
21. Remove wire harness for engine.
Installing wire harness for engine