911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-696001.png)
Ignition Switch: Removal and Replacement
Removing And Installing Ignition Switch
Tools
Technical values
Removing ignition switch
1. Carefully lift up rubber sleeve on the ignition switch using a plastic spatula, for example, and remove it.
2. Turn union nut using a narrow plastic spatula, for example, or using the special wrench T10152 tool and unscrew the ring from the ignition switch.
3. Press ignition switch inwards and remove towards the bottom.
