911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1.1.
Loosen the pressure line (thinner line) - up to model year 2008
Loosening plug-in coupling on pressure line
Remove circlip -D- from the pressure line (thinner line) -2-.
Loosen (unscrew) the plug-in coupling. When loosening, turn at the threaded joint -A- and counter at the hexagon on the plug-in coupling -B-.
Collect hydraulic fluid in a container.
1.2.
Loosen the pressure line (thinner line) - as of model year 2009
Release the plug-in coupling using the loosening tool 9780.
To do this, fit the special tool on the loosening sleeve plate -3-and insert it as far as it will go over the 60° chamfer.
If the tool is turned 180° before fitting, it cannot be inserted.
The 60° chamfer on the loosening tool must be facing the 60° chamfer from the connector (line -1-)!
Releasing plug-in coupling (as of model year 2009)
Once you have released the plug-in coupling (by inserting the loosening tool), pull the lines apart -arrows-.