911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-796008.png)
Rear-axle carrier side section
1. Install rear-axle carrier side section -1-.
Fit rear-axle carrier side section -1-. Loosely fit lock nut -7- and screws -5, 6-.
2. Fit upper control arm -8-.
Upper control arms
Fit both control arms -8- at the rear-axle carrier side section. To do this, screw in (fit) bolts -11, 12-.
Lower control arms
3. Fit lower control arms -13, 21-.
Insert both control arms -13, 21- on the rear-axle carrier side section and screw in (fit) bolts -12, 15, 22-.
