911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Cross member
4. Install cross member -14-.
Insert cross member -14- and fit M12 x 80 bolts -15, 16-.
Diagonal brace
5. Install diagonal braces -10-.
Fit diagonal braces -10- and screw in (fit) screws -12, 13-.
6. Install the transverse strut.
Fit transverse strut and screw in (fit) screws.
7. Fit brake hose bracket on the rear-axle carrier side section.
Removing and installing diagonal arm
8. Install diagonal arm -17-.