911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Rear left sensor
Installing sensor
Installing sensor on front axle
-
Secure sensor -3- to the holder (two M6 nuts -2-/tightening torque 10 Nm or 7.5 ftlb.).
Plug in connector -1- on the sensor -3- until it locks securely.
Install covers over the right spring-strut supporting mount.
Front right sensor
Install sensor on rear axle
-
Install sensor -4- and secure it (using two plastic nuts -3-/tightening torque 2.5 Nm or 2 ftlb.).
Plug in connector -2- on the sensor -4- until it locks securely.
Install left back seat backrest -1-.
Fit sound absorber for seat well control unit (above the sensor).