911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-804002.png)
the lock nut. If this incorrect combination is used, the safety effect could not be assured or would only be provided conditionally.
2. Use new fastening nuts. Fit the assigned lock nut -Down arrow to the connection from the suspension/stabilizer to the stabilizer depending on the
version (longer or shorter pin).
3. Observe prescribed tightening torques. Tighten the lower lock nut (M10) in three stages.
4. Fit wheel.
