911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1. Raise the vehicle at the prescribed jacking points. G
2. Remove the underbody panels.
3. Place oil collection pan under the transmission.
Changing ATF
Draining ATF
ATTENTION: Transmission cannot be filled, or only insufficiently with ATF.
^
Do not start engine
^
Do not tow vehicle
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)
1. Unscrew the drain plug -1- and drain the ATF.
2. Replace sealing ring for drain plug and tighten screw. Tightening torque: 22 (16 ft lb.) Nm.
Topping up ATF
ATTENTION: Transmission cannot be filled, or only insufficiently with ATF.
^
Do not start engine
^
Do not tow vehicle
Note: To undo and tighten the cap nut for the charging valve, counter with a ring wrench!
1. Unscrew control screw -2-.