911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-548006.png)
3. Remove cardan shaft.
4. Remove cardan flange.
5. Place oil collection pan under the transmission.
Removing sealing ring for cardan flange
1. Remove circlip.
2. Remove washer.
3. Use a suitable tool, e.g. a sharp punch, to make a hole in the sealing ring.
4. Screw sheet metal screw approximately 1 cm into the sealing ring sheet metal screw
