911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1. Pull out fixing pin 95951 (long) from transmission housing.
Note: When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
2. Screw two screws (M8) into torque converter and remove torque converter using the screws from transmission input shaft.
Removing the torque-converter sealing dog
1. Remove sealing ring for torque converter with hook VW 681.
Installing the torque converter sealing ring
1. Thinly coat sealing lip of new sealing ring with Vaseline.