911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
Installing sealing ring for front halfshaft flange
1. Fill the space between the dust and sealing lips on the new sealing ring with grease, e.g. Liqui-Moly.
2. Drive sealing ring into the transmission using pressure piece P 9537.
3. Replace circlip for the halfshaft flange. To do this, clamp the flange in the vice with a hexagon-head bolt -B- and press out the circlip with the new
circlip -A-.
4. Grease circlip for easier fitting.