911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
/f6-3.6l/Page-622001.png)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Front Halfshaft Flange
Removing and installing sealing ring for front halfshaft flange
Tools
Preliminary work
1. Raise the vehicle at the specified jacking points.
2. Remove front underbody panel.
3. Remove front drive shaft.
4. Place oil collection pan under the transmission.
Removing sealing ring for front halfshaft flange
1. Lever out halfshaft flange with mounting lever.
