911 Carrera 4 Cabriolet (997) F6-3.6L (2006)
1. Undo front and rear fastening screws -1- from the convertible top support and the belt guide section -arrows A- , and pull rear window inner seal
-2- up and out -arrow B-.
2. Connect the PIWIS tester 9718 to the diagnostic socket.
3. Switch on ignition.
NOTE:
-
The rear window lifter can only be removed when closed.
-
This closed state can only be achieved with the PIWIS tester when the convertible top is in service position.
4. Select the Convertible top menu item, then Drive links, and select the Raise rear door window (left or right) menu item in the command line which
then appears.
NOTE: The lower adjusting element for power windows is only accessible by removing the rubber sleeve from the wire harness for power windows.
5. Remove rubber sleeve -1- from wire harness for power windows -2- by pulling it inwards -arrow-.