porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Spoiler Motor Cable Cap - Water Entry|Page 5434 > < Rear Spoiler Control Unit - Revised, Manual Operation|Page 5429
Page 1
background image

Spoiler: All Technical Service Bulletins
Spoiler Motor Cable Cap - Water Entry

June 28, 1991

Model 

Group

911 C2/C4

6

Part Identifier

Number

6672

9103

Subject:

Spoiler Drive Cable Cap

Figure 1

ATTENTION: Service Manager/Service Technician

Models Affected:

911 Carrera 2 and 911 Carrera 4 Model Year 89 (K) and 90 (L)

Concern:

Water enters rear spoiler motor through spoiler drive cable cap (Figure 1).

Vehicle Information:

A modified cap (different material) is installed from production date: June 5, 1990.

VIN:

96 - LS 45 2085 - Coupe 96 - LS 46 0725 - Targa 96 - LS 47 2058 - Cabriolet

The cap should be replaced on all 89 (K) and 90 (L) model year vehicles up to the above VIN when the vehicle
is in the workshop for normal service or other repairs.

Figure 2

Work Procedure:

Open engine lid and pull off drive cap.

Pry off tensioning ring with small screwdriver (Figure 2).

Spoiler Motor Cable Cap - Water Entry|Page 5434 > < Rear Spoiler Control Unit - Revised, Manual Operation|Page 5429