911 Carrera 4 Cabriolet AWD F6-3600cc 3.6L SOHC (1990)
Ignition Rotor: Description and Operation
The resistor rotor is mounted on the distributor shaft which rotates at the rpm of the camshaft. The distributor, cap, and rotor are set so that when an
ignition impulse is generated by the coil, the rotor points to the appropriate terminal of the distributor cap and the ignition energy is directed to the
correct cylinder through the ignition wires. A 1K ohm resistor is molded into the rotor for radio frequency suppression.