911 Carrera 4 Cabriolet AWD F6-3600cc 3.6L SOHC (1990)
Oxygen Sensor: Service and Repair
Remove and Replace
Fig. 54 Oxygen Sensor
OXYGEN SENSOR REPLACEMENT
When replacing oxygen sensor, always use the following precautions:
-
Be sure threads are free of damage, burrs, and carbon deposits.
-
Be careful not to damage pigtail wires when removing or installing sensor.
-
Be sure threads are coated with high temperature anti-seize compound (carefully coat threads so as not to contaminate inside sensor surfaces Fig.
54.).
-
Install and tighten to specified torque (49-57Nm / 36-43ft.lbs.).
-
Make sure harness connection is clean and tight.