911 Carrera 4 Cabriolet AWD F6-3600cc 3.6L SOHC (1990)
Removal
1. Press out rear wheel hub with pressure piece P 297 A (1), using separating device (2) as a support.
2. Heat rear-axle trailing arm to 120 - 150 °C. Press in angular contact ball bearing using pressure piece WV 432 (3) and suitable supports.
Installation
1. Prior to pressing in the wheel bearings, heat rear-axle trailing arm to 120 - 150 °C. Insert angular contact ball bearing and follow by pressing in
lightly using suitable supports.
2. Insert retainer plates and tighten hexagon head bolts to 20 Nm (15 ft lb).
3. Press in rear wheel hub with pressure piece P 297 A (large diameter). Use a suitable support for the angular contact ball bearing.