911 Carrera 4 Cabriolet AWD F6-3600cc 3.6L SOHC (1990)
-
Push servo spring into correct position (arm behind collar of adjusting cam) and pretension servo spring, pulling clutch lever to the rear. Attach
clutch pressure rod to actuating lever.
-
Once cylinder has been aligned, tighten master-cylinder securing nuts or pressure rod to actuating lever (depress clutch).
-
Install pedal plate. If necessary (if parts concerned have been renewed) check pedal travel and correct if necessary. Check full-load position of
throttle valve (min. 1 mm play - when accelerator pedal fully depressed) and correct if necessary.