911 Carrera 4 Cabriolet AWD F6-3600cc 3.6L SOHC (1990)
Legend 2
-
Refer to images for instructions and legend.
NOTE:
-
Footnotes to Legend 1:
*From 1991 model on, starter motor with external bearing
**As of March 1991, the sealing ring at the adjustable mating bearing screw is omitted. To seal, Loctite 222 is applied.
-
Footnote to Legend 2:
**From 1990 model on, starter motor with external bearing
Assembly
1. Fit bleeder in correct position and tighten with 35 Nm (26 ft lb).