911 Carrera 4 Coupe (996) F6-3.6L (2002)
Lifter / Lash Adjuster: Adjustments
Adjusting Timing of Cylinder Bank 4-6 - Engine Installed
Adjusting timing at cylinder bank 4 - 6
1. Position special tool, adjustment device 9612/9, on the cylinder head or the camshaft bores.
2. If the special tool cannot be inserted in the bores, allocate the camshafts accordingly and turn the exhaust camshafts with an open- ended wrench
(wrench size 24) until the adjustment device can be inserted with ease. Fasten adjustment device with a hexagon-head bolt M8 x 30.
3. Fasten four hexagon-head bolts (M6 x 15) on the chain sprocket.
4. Take special tool, adjustment device 9612/9, off the cylinder head.
5. Fasten special tool, holding-down device 9634, on the cylinder head using a hexagon-head bolt M8 x 30.
Note: Only remove holding-down device 9634 when the cylinder head cover has been fitted.
6. Remove holding-down device (special tool 9611) from the camshaft bearing saddles.