911 Carrera 4 Coupe (996) F6-3.6L (2002)
Oil Separator: Service and Repair
WM 105519 Removing and installing oil separator
Preliminary work
Preliminary work for removing oil separator
1. Remove air cleaner housing.
Removing oil separator
Removing oil separator
Information:
Cover engine openings (e.g. intake openings, crankcase, oil lines, open reservoirs etc.) cover with a cloth to avoid dirt and foreign bodies falling in.
Information:
Following removal, place the air conditioning compressor on a suitable protective support (e.g. foam, neoprene).
Information:
The air-conditioning lines on the compressor do not need to be disconnected in order to remove the engine/transmission unit.
Following removal, place the air conditioning compressor on a suitable protective support (e.g. foam, neoprene).
1. Detach air conditioning compressor without disconnecting the air conditioning lines.
2. Disconnect ground connector from intake distributor side 4-6 -arrow-.
Air conditioning compressor ground line
3. Pull the engine compartment temperature sensor out of the intake distributor 4-6 together with the rubber sleeve -1- and unscrew the rear fastening
screws -2- of the air conditioning compressor.