911 Carrera 4 Coupe (996) F6-3.6L (2002)
Coding Table (Part 3)
Coding
Coding
Under the menu item 'Modify coding', the PCM2 codes can be coded on a vehicle and country-specific basis.
Menu item
Function
-
Vehicle type vehicle coding
The CDR23 can be coded in accordance with the vehicle type using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select 'Vehicle type vehicle coding' in the Coding menu and confirm with the [>>] key.
-
Select '911 (996)' in the menu and code with the [F8] key.
-
Vehicle version vehicle coding The CDR23 can be coded in accordance with the vehicle version using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the CDR23 function selection and confirm with the [>>] key.
-
Select 'Vehicle version vehicle coding' in the Coding menu and confirm with the [>>] key.
-
Select "911 (996)" in the menu and code with the [F8] key.
-
Right/left-hand
The CDR23 can be coded in accordance
drive vehicle coding:
with the vehicle model using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select"Right/left-hand drive vehicle coding" in the 911 (996) CDR23 coding function selection and confirm
with the [>>] key.
-
Select"Right/left-hand drive" in the menu item that is displayed and code it with the [F8] key.
The following selection is available:
-
Right-hand drive.
-
Left-hand drive.
-
Air conditioning
You can code the relevant vehicle version
with/without
with or without air conditioning using this menu item.
-
Connect and start the 9588 Porsche System Tester II and switch on the ignition.
-
Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
-
Select 'CDR23' in the Control units menu and confirm with the [>>] key.
-
Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
-
Select"Air conditioning with/without" in the 911 (996) CDR23 coding function selection and confirm with the
[>>] key.
-
Select 'with or without' in the menu corresponding to the vehicle equipment and code with the [F8] key.
-
GAL (noise-dependent
You can code the NLB as required using
loud-speaker boost - NLB)
this menu item.