porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Sunroof / Moonroof Switch > < Removing and Installing Motor for Sliding Roof|Page 6501
Page 2
background image

3. Engage cover on the windscreen frame at front and push rearward. Unclip locking tabs -arrows B- of the cover on the left and right. Tighten

fastening screws with a crosshead screwdriver -A-.

4. Fit cover lenses.

Emergency operation on lifting/sliding roof drive

The lifting/sliding roof drive can also be operated manually if the electric drive should fail. Check fuse D 3 before emergency operation.

-

An angle screwdriver (a/f 4 hexagon socket) is clipped in behind the cover. The drive axle can be turned with the angle screwdriver -see figure-.
The lifting/sliding roof drive must not be operated again after emergency operation.

Sunroof / Moonroof Switch > < Removing and Installing Motor for Sliding Roof|Page 6501