911 Carrera 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-403021.png)
3. Fasten seat belt mount at left and right.
3.1. Tighten fastening screw -2- , seat belt with fitting -3- and spacer sleeve -4- on inner lower side member.
- Tightening torque: 50 Nm (37 ftlb.)
3.2. Press in -1- cap.
Installing front main wire harness
1. Push through main wire harness in direction of plenum panel.
2. Fit grommets -41- centre, left and right.
