911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
/f6-3.8l/Page-287024.png)
53. Push two spacer sleeve onto the assembly tube for the assembly of pistons pins and circlip on cylinder.
54. Fit the piston-pin circlip for cylinder using two sleeves.
55. Once the pistons have been installed, seal the bore for the piston pin and circlip assembly on the crankcase using the aluminium screw plug and
new sealing ring. Tightening Torque: 59 ft. lb.
Installing pistons, touching up
1. Assemble engine.
