911 Carrera 4S Cabriolet (997) F6-3.8L (2006)
Differential Output Shaft: Service and Repair
Removing and Installing Long Halfshaft Flange
Removing and installing long halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove left rear wheel.
3. Remove left drive shaft.
Removing long halfshaft flange
1. Unscrew fastening screw for the coolant hose holder on the mounting saddle.
Holder screw
2. Unscrew fastening screws for the mounting saddle using socket wrench 9330.