911 Carrera Cabriolet (996) F6-3.4L (1999)
10.
Install the driver and passenger center console covers (foot-well area).
11.
Connect the battery.
12.
Perform a function test. Also test the alarm system by closing all windows, doors, and lids. Then lock the vehicle with the radio remote control or
vehicle key.
-
If the alarm horn beeps, one or more alarm inputs are activated. Unlock the vehicle. Use the Porsche System Tester 2 (PST2) to check the fault
memory and input signals of the alarm control unit to locate the problem. After correcting the problem go to step 13
-
If there is no sound from the alarm horn, the system is OK. Unlock the vehicle and continue with the next step
13.
Input the 4-digit PCM code.
14.
Erase the DME fault memory using the PST2. There may be a "Supply voltage interrupted" fault stored in the DME. Shut down and disconnect the
PST2.