911 Carrera Cabriolet (996) F6-3.4L (1999)
See: Section G8/G8.4 - Front and Rear Aprons
G8.4 - Front and Rear Aprons
G 8.4 Front And Rear Aprons
G 8.4.1 Basic procedure
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
When painting new front and rear aprons that have been primed and supplied by the factory, it is not necessary to prime the part prior to the
topcoat application.
-
Do not sand down factory-applied primer if possible.
The front and rear aprons are painted according to the procedure used for painting new plastic parts or surfaces:
New parts
Surface painting