911 Carrera Cabriolet (996) F6-3.4L (1999)
5
-
Installing main bow
1. Position main bow -14- on convertible-top support -1-.
2. Position square hole washer -15- and washer -16- on the main bow. Secure the main bow -1- with the fastening screw -17-. Coat the
fastening screw -17- with Loctite 270 and screw in.
Tightening torque: 9 Nm (7 ftlb.)
6
-
Installing corner bow
1. Insert bushing -4- 10x2x15 into the bore of the corner bow -18-.
2. Insert corner bow -18- on the convertible-top support -1- and insert the anti-spread lock -19-. Secure the anti-spread lock with the retaining
pin.
7
-
Installing tension bow
1. Insert bushing -20- into the bore of the main bow -14-.
2. Position tension bow -21- on the main bow and press in the anti-spread lock -19-. Secure the anti-spread lock with the retaining pin.