911 Carrera Cabriolet (996) F6-3.4L (1999)
11
-
Installing drive lever
Position drive lever -29- on the main bow -14- and secure the drive lever -29- with retaining clip -7- SLB 10.
Installing electrical wiring harness
12
-
Installing wiring harness on roof frame 1 and 3
1. Clip the fastened clips on the convertible-top wiring harness -30- into the holes provided on roof frame 1 -11- (clipped in 3 positions).
2. Clip the fastened clips on the wiring harness -30- into the holes provided on roof frame 3 -8- (clipped in 2 positions).
-
Dimension -inset X- up to model year 2001. Position angle on roof frame 3 and screw in with the fastening screws -33-. Fit rubber
sleeve -31a- and plastic cover -31b- on the bracket -31-.
Tightening torque: 2.8 Nm (2.0 ftlb.)
-
Dimension -inset Y- as of model year 2002. Position plastic bracket -32- on roof frame 3 and screw in with the fastening screws -33-.
Tightening torque: 2.8 Nm (2.0 ftlb.)