911 Carrera Cabriolet (996) F6-3.4L (1999)
Clutch Pedal Assembly: All Technical Service Bulletins
Brake/Clutch Pedal - Noise When Operating
911 (996)
3/98
4605
9-11-98
Noise From Brake/Clutch Pedal
Vehicle Type:
911 Carrera (996)
Model Year:
As of 1999 (X)
Concern:
Noises when operating the brake pedal or clutch pedal.
Information:
Squeaking and/or clicking noises can occur when the brake or clutch pedals are operated, and should be repaired as outlined.
To repair noises, the pedals must be removed, and the following surfaces lubricated with Optimal Optitemp LG2 grease, Part Number, 000 043 203 37:
1)
All sliding surfaces of the brake and/or clutch pedal bushings. See 911 Carrera (996) Technical Manual, Binder Group 4, Section 46 05 19, pages
46-29 - 46-37 for work procedure.
2)
All pivot surfaces of the clutch pedal boost spring (if applicable). It is extremely important to clean all pre-existing grease residue from the boost
spring pivot points before applying new Optimal Optitemp LG2 grease! Cleaning must be performed with petroleum naphtha, as outlined in the
911 Carrera (996) Technical Manual, Binder Group 4, Section 46 05 19, page 46-31 (last paragraph). Observe the safety instructions in the
Technical Manual when handling the boost spring. (A cotter pin must be used to secure the boost spring before pedal cluster disassembly, to
prevent injury).
Failure to follow the outlined procedure or to use the proper grease may result in an unsuccessful repair.
Parts Info.:
Part Number
Description
000 043 203 37
Optimal Optitemp LG2 grease (80 gram tube, sufficient for several vehicles)
Labor:
Operation
Time Units
Description
46 05 19 06
260 TU
Removing and Installing pedals, lubricating components,
manual transmission
46 05 19 09
160 TU
Removing and Installing brake pedal, lubricating components,
Tiptronic transmission
Literature:
911 Carrera (996) Technical Manual, Binder Group 4, Section 46 05 19, pages 46-29 - 46-37.