911 Carrera Cabriolet (996) F6-3.6L (2003)
9. Undo two hexagon-head bolts (a/f 10 mm) on the oil filler neck. Pull oil filler neck out of the crankcase.
Installation
1. Fit new sealing ring (42 x 4) on oil filler neck. Coat new sealing ring, e.g. with tire mounting paste, and fit oil filler neck on crankcase.
2. Secure new micro-encapsulated hexagon-head bolts (M6 x 16).
Tightening torque: 10 Nm (7.5 ft. lbs.)
3. Fit intake distributor. Ensure that the vacuum line is seated correctly in the right rubber sleeve.
Arrow show marking (line) on the intake distributor
4. Centre the intake distributor. Push both rubber sleeves onto the intake distributor up to the marking (line). Check distance between intake
distributor and support for hydraulic pump, they must be at least 5 mm apart.