911 Carrera Cabriolet (996) F6-3.6L (2003)
Seals and Gaskets: Service and Repair
Removing and Installing Long Flanged Shaft
392519 Removing and installing long flanged shaft (as of MY 2002)
Tools
Removing long flanged shaft
1. Remove left rear wheel.
2. Remove left drive shaft.
3. Unscrew fastening screw for the water hose holder on the mounting saddle.
4. Unscrew fastening screws for the mounting saddle with a Torxsocket wrench 9330 .
5. Carefully pull out flanged shaft.
Installing Long Flange Shaft
Install in reverse order, observing the following points: