911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-851002.png)
2. Unlock electric connector -a- and disconnect from power window motor.
3. Unscrew the three fastening screws -1-.
4. Pull the power window motor out of the teeth.
Installing power window motor
1. Position power window motor and push into the teeth.
2. Screw in the three fastening screws. -] Tightening torque: 2 ftlb.
3. Press in electric connector on power window motor until it is felt to engage.
NOTE: The end positions of the power windows are deleted from the control unit when the electric connectors are disconnected and connected.
