911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-860001.png)
Hood Latch Release: Service and Repair
Removing and Installing Servo Motor For Emergency Release
Removing And Installing Servo Motor For Emergency Release
Preliminary work
Preliminary work on servo motor for emergency release
Refer to Removing and installing front apron on "removing"
Removing servo motor for emergency release
1. Switch off ignition and remove ignition key.
2. Release electric connector -A- and unplug it at the servo motor.
3. Unscrew both fastening screws -1-.
