911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-861002.png)
5. Pull the bowden cable for the lock actuator -B- and the emergency operation bowden cable -A- inward through the grommets.
6. Remove servo motor.
Installing servo motor for front lid release
1. Route the bowden cable for the lock actuator -B- and the emergency operation bowden cable -A- through the grommets.
2. Engage the bowden cable at the lock and bend down the cover.
3. Push electric plug onto the servo motor until it is felt to engage.
4. Insert the servo motor in the luggage compartment area and replace the carpet correctly.
