911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-875004.png)
NOTE: When sliding in the underbody trim panel, make sure the overlap is correct.
1. Insert cover for side underbody -1-.
2. Tightening fastening screw -2-.
Tightening torque: 1.5 ftlb.
3. Tightening fastening nuts -3-.
Tightening torque: 1.5 ftlb.
Subsequent work
Reworking
Lower the vehicle. Refer to Lifting the vehicle
