911 Carrera Cabriolet (997) F6-3.6L (2007)
NOTE:
-
The repair bush must be installed recessed. Milling in may only be performed using the Porsche special tool contained in the Time-Sert thread
repair kit.
-
While pressing in the base thread, a noticeably larger amount of force is required on the screw-in tool to form the internal thread. Pressing is
finished when the screw-in tool can be turned further more easily.
1. Drill out thread
Select M10 or M14 kit.
Drill out old thread as far as the base of the thread using a drill bit contained in the M10 or M14 kit B.
2. Mill in shoulder
Select M10 or M14 kit.
Mill out bore hole up to dimension X using spot facer C. Milling in may only be performed using the tool contained in the Porsche special tools.