911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-886020.png)
6. Remove trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard
Removing tunnel support
1. Unscrew plug connection for centre console -1- in -direction of arrow- from the tunnel support -2-.
2. Unclip tie-wrap for wire harness -1- at the tunnel support -2- by pressing the locking lugs -arrows- together.
3. Disengage wire harness -1- at the tunnel support -2- (holder) -arrows A- and slide through towards the rear -arrows B-.
