911 Carrera Cabriolet (997) F6-3.6L (2007)
Console: Overhaul
Disassembling And Assembling The Centre Console
Preliminary work
1. Remove centre console. Refer to Removing and installing centre console
2. Remove front ashtray. Refer to Removing and installing front ashtray
3. Remove cover for rear tray. Refer to Removing and installing cover for rear luggage tray
4. Remove cigarette lighter. Refer to Removing and installing cigarette lighter
5. Remove centre console socket. Refer to Removing and installing socket
6. Remove interior monitoring sensor. Refer to Removing and installing interior monitoring sensor
NOTE: Only in the cabriolet.
7. Removing switch for convertible top operation Refer to Scd
8. Remove wire harness for centre console. Refer to Removing and installing wire harness for centre console
Disassembling the centre console
Disassembling centre console
1. Unclip fastening nut, check and replace if necessary.
2. Turn over centre console.
3. Unscrew fastening screw -1-. Press in locking tabs -arrow A- and remove insert of locking mechanism -2-.
NOTE: Only in the coupe.
4. Unscrew fastening screws -1- and remove extension -2- from centre console -3-.