911 Carrera Cabriolet (997) F6-3.6L (2007)
12. End convertible top service position.
Installing convertible-top inner lining at rear
1. Lift the metal clips using a plastic spatula -A- and insert a small screwdriver under the metal clips -B-. Insert the connection piping -1- of the
convertible-top inner lining underneath the metal clips -C-. Ensure that the clearance cuts of the convertible-top inner lining -D- are positioned at
the electric connection of the rear window.
2. Knock the metal clips with a plastic hammer. Make sure that the metal clips engage in the frame cut-outs.
3. Press the convertible-top inner lining connection into the groove of the tension bow.