911 Carrera Cabriolet (997) F6-3.6L (2007)
2.1. Secure fabric guide plate -1- and styling frame -2- with the fastening screws -3- and washers -4-. Tightening torque -] Tightening torque: 1.7
Nm (1.5 ftlb.)
NOTE: Coat fastening screws -7- for styling frame 2 with Loctite 243.
2.2. Position styling frame -2- on roof frame 2 -5-. Adjust gap -A = 3.1 + 0.5- between styling frame 2 -2- and styling frame 3 -6-. Tighten
fastening screws -7- and washers -8-. Tightening torque -] Tightening torque : 10 Nm (7.5 ftlb.)
3. Install seal on styling frame (roof frame 3).
3.1. Position aluminium profile -1- on styling frame -2- and screw in place with fastening screws -3-. Tightening torque -] Tightening torque: 1.7
Nm (1.5 ftlb.)
3.2. Insert seal -4- into the aluminium profile -1-.
4. Install seal on styling frame (roof frame 2).
4.1. Position aluminium profile -1- on styling frame -2- and screw in place with fastening screws -3-. Tightening torque -] Tightening torque: 1.7
Nm (1.5 ftlb.)
4.2. Insert seal -4- into the aluminium profile -1-.