911 Carrera Cabriolet (997) F6-3.6L (2007)
1. Press out the two retaining clips -1- from the lever -2- using assembly tool for Springfix System pin circlips NR.131 and remove lever.
2. Pull the protection plate -3- upwards out of the chamber in the water drip pan -4-.
CAUTION: Damage to hydraulic lines.
-
Do not bend, trap or crush hydraulic lines when removing and installing.
-
Pay special attention when routing hydraulic lines in the clips.
3. Unscrew fastening nut -5- and lay hydraulic cylinder -6- with lever to one side.